After the insulator has been removed you can see the inside supports of the filament and the fill hole. In the old days bulbs were evacuated of atmosphere to keep the filament from oxidising and burning through. Now days the glass envelope is back filled with an inert gas like argon. The keeps the filament from burning through and makes the bulbs safer.
You can now shake the filament assembly out of the tube. If the tungsten wire is still intact you could probably find a good use for it. You could make another light bulb if your stuck for something to do I suppose.
and he has a pipe. He had a pair of snippers, snipped the top off poured salt in from McDonalds, dumped it out, inserted his meth into the light bulb, flame to bulb, then took the pen apart, insert into bulb and smoke.
you can skip steps 8 and 9 by using clear light bulbs, no bothersome/hazardous powder removal. i would recommend this route untill we know what that powder is, as this government is notoriously scared of unidentified white powders.
I am a teacher trainer for elementary science and would like to show teachers how the lightbulb works. Do you know of a way to take off the bottom of the bulb to show how the wires are attached to the metal collar and how a wire comes out the bottom?
hello, now i know how you hate people refering to drug stuff with this, but here is a tip for cleaning out the white powder. put a little salt, a teaspoon or two, and heat it with a lighter or candle, when it starts to melt together, shake it around the light bulb. this workes very well,and it helps get any tiny bits of glass out. just ask any methhead homeless dude.
to make a hole in the glass use a blowtorch and put it on the spot you want the hole then make that sm=pot red hot. blow into the light bulb whil its still red hot, and bublble will apear. it will pop, leaving a hole. if you are a pussy, then use some of that white medical tape or threadig tape, wrapp some around the metal base of the light bulb, and put a bottle cap ion it. make a hole in the cap and use a staw or hose in the cap to blow air into the bulb. by the way,, dont get cought doing this, cuz itsd how you make meth pipes.
What about making your miniature garden inside the hollowed up bulb? I think it could be easy to find the appropiate blend of sand and fertile material. Any seeds, humidity, temperature, light and patience could do the rest.
Alvaro: Absolutely! Using a light bulb as a terrarium is a brilliant idea! That opens up a whole new world of possibilities for your little environments. Moss, cactus, green plants, you name it and it should work. Way to go!-John
something interesting to do w/ the light bulb is making it into a small vase for a plant. after u hallow it out, find a long (about half the size of the lightbulb), slender piece of glass or metal. tie a long sting around the piece or glass or metal. insert it in the lightbulb, then pull the string. this should allow u to hang the bulb. i but a piece of ivy in it and hung it around a curtain rail in my kitchen. dont forget to water it. *remember to change the string every so often because the water could break down the string*
Thank you so much for this. I was looking for a way to poke a hole in a bulb, but found this to be so much cooler. I needed to make a project for my intermedia class, and this was the first thing that came to mind.
My plans for the lightbulbs will include an attempt at a fresh herb garden, and using some smaller (thinking appliance bulb size) bulbs to make a spice rack. I think the rack itself could be up-cycled from coat hangers or other wires and assembled in a similar manner to a wine bottle rack.
Empty incandescent light bulbs can be reused for numerous crafts, decorations, and science projects. Opening a light bulb can be a little tricky the first time, but the task is very doable once you know what to expect and how to manage it.
Chore boy is just brillo pad basically that you use as a screen in the tube. Also in a pinch I suppose you could use a weed pipe with a metal screen (or chore boy). With smoking crack you want to kinda melt the rock into the chore boy, and then hit that. Free base cocaine is kinda a runny liquid almost so melting it into the chore prevents it from just dripping down the pipe.
People say the chore stops the residue from sliding down my pipe but no matter what method i choose to smoke, there is always residue still running down the pipe Yeah, that'll happen. When you first hit it, you'll be holding the pipe upwards so as not to drop your hit - but as the crackling sound dies down and you begin to pull thick smoke, lower it down as you inhale. I like to hold it slightly downwards, so that it burns off the chore and doesn't run down past it into the pipe as much. Rotate the pipe as you inhale, also. But you'll have some residue no matter what.:p. Yeah I was first taught to smoke crack at age 17 in Cleveland, Ohio by my friends uncle and was taught to make the pipe using a tire gauge with everything ripped off but the pipe part and if it has oil inside it (some do, the one I just bought in Chicago didn't, and ironically the choir boy they sell is silver, so no copper to burn off) once the pipe is ready and you have your choir boy filter nice and as tight as you can get it and still stuff it in the pipe, do so (I make it so it almost doesn't fit in the pipe so it scrapes any resin nice and good Bc it seems to shrink a little with use).
Although crack and cocaine are both derived from the cocoa plant, cocaine is the drug in a powdered form. To make crack, cocaine powder is mixed with water and another substance, typically baking soda. The mixture is boiled, solidified, and broken into small, uneven chunks that pop and crackle when hot. Cocaine is usually snorted. While crack can be injected, it is typically smoked or inhaled. Both are dangerous, highly addictive drugs that ravage the mind and body very quickly, and both can lead to many serious effects, including stroke, seizures, and cardiac arrest.Although crack is substantially less expensive than regular cocaine, it becomes very costly when the brain becomes accustomed (or tolerant) to the drug and increasingly larger doses of crack are needed to achieve the desired high.
Created in the shape of a light bulb and accessorised with a straw, the product carries a strong resemblance to the homemade "crack pipe light bulbs" from which users without access to meth pipes sometimes consume their drugs.
Created in the shape of a light bulb and accessorised with a straw, the product carries a strong resemblance to the homemade \\\"crack pipe light bulbs\\\" from which users without access to meth pipes sometimes consume their drugs.
Using a Light bulb vaporizers is like smoking out of a crack pipe. Designs that have glass and heat guns are the best way to go or just buy one. -vaporizer.blogspot.com if you want to try and make one.
If you've ever been motivated to make a DIY mouthpiece, you probably have found a way to do it. Making your pipe is certainly doable when you use common household materials such as aluminum foil, a ballpoint pen to make a pen pipe, or a plastic bottle to make a water bottle bong. Even an apple with the top of it cut off can be useful as an apple pipe.
Anodizing is an electrochemical process that converts a metal surface into a durable and corrosion-resistant finish. Metal with an anodized finish is chemically stable and will not decompose. It is non-toxic and heat-resistant to the melting point of aluminum (1,221 °F). If you're looking for a pipe that's fun and easy to carry, provides a great high, and is also affordable and durable, look no further than the DART Plus. It's got everything you're looking for in a pipe and makes smoking the enjoyable blast of recreation it should be.
Water pipes are pipes that allow the smoke from lighting dry weed to pass through percolating water before it's inhaled. Common types include the classic Middle Eastern hookah and the bong. Water pipes allow the water to filter smoke, resulting in a smoother hit than with classic joints and cigarettes.
If you're wondering how to make a pipe out of materials you've got at hand, we've got you covered. These may not be the most beautiful or durable pipes, but they are made from materials you've probably got at hand.
One "shortcut" can involve a mold, using a wire in the middle to keep a hole for smoking. You do need a workshop including a vice to make clay pipes this way, which can then be left to dry for a couple of days before being fired in a kiln. However, clay pipes are certainly beautiful and personal if you can get yourself a workshop and materials.
If you have the choice, why would you make your enjoyable weed break anything but pleasurable? You could smoke out of a toilet paper roll, but there are better options that are more sophisticated. Requiring slightly more work to make are the homemade water pipe and bong options. And in the "probably out of reach for most people" category is the homemade clay pipe.
Drugs that are smoked in a glass pipe include cocaine, marijuana, opioids, and methamphetamines. Crack cocaine is often smoked in a glass cylinder pipe. Heroin and methamphetamine vapors are inhaled after being heated in the bowl of a glass pipe. Marijuana is usually smoked out of a metal pipe, glass pipe, or out of a bong. A bong is typically made out of glass, but can also be made out of plastic. Bongs usually have a bowl outside of a vertical tube, with water being in the bottom of the pipe to serve as filtration and can vary quite a lot in size. The long-term use of drugs can change the pathways in the brain which can make it much more difficult to stop using. Smoking drugs in a glass pipe can cause long-term damage to the lungs and other parts of the body.
The activity itself is a worthwhile activity and if not performed before, one ought to try it before reading further. Like many lab activities, there is power in the actual engagement in the activity that cannot be replaced by simply reading about it. When this activity is performed in the physics classroom, there are numerous observations that can be made by watching a class full of students eager to find the four arrangements. The following arrangements are often tried and do not result in the lighting of the bulb. 2b1af7f3a8