Ug Nx4 License File 20 ##VERIFIED##

Download File ===> https://urllie.com/2sXy5j

hi,maybe you could help me'I tried to install patran-nastran 2005.when I ipconfig my computer, I get computername, ethernet address and IP.I have tried to edit licence.dat as below:SERVER 001921e538de ANY 1700DAEMON MSC C:\flexlm\msc.exeFEATURE ABS MSC 2004.0999 31-dec-2019 99 C7F4CF558D56 ISSUER=ROR \ SN=1272467-3A3E3AF6FCE2C85F8742FEATURE ACIS MSC 2004.0999 31-dec-2019 99 F06B09344A45 ISSUER=ROR \ SN=1072400-8B72E41C49D5B2B25746FEATURE ACIS_NAME MSC 2004.0999 31-dec-2019 99 78D7DB209BCA \ ISSUER=ROR SN=1296724-FC8DA9FD8E899967E16D.....where 001921e538de is my Ethernet address it keeps telling me "Your request to run MSC.Patran has been denied. Server node is down or not responding"though it says "Server Start Successful" when I start it in lmtools.with computer name insteat of Eth, address it says that license.dat is wrong. so, what should I put as hostname?could you help me?thank you.

Hi.I hope you can help me. I installed NX4 and even tried NX5, but neither of them will work. I have edited the licens as followed in NX5:SERVER monster ID=20070424 28000VENDOR ugslmdthen I start the lmtools and go using the licensfile, but when i then go to the tab, start/stop/reread, lmtools crashes. And the log file in UGSLicensing i saying the it could not open the port lstet in the licensfile.So I realy hope you can help me.I am using XP PRO SP3.

Hi.Anonymous......I was out of station from last 4 days,so here is solution for ur problem....u r using ur lic. file like thisSERVER monster ID=20070424 28000VENDOR ugslmdreinstall lic. server and use the lic. file during installation.before installation edit lic. file like this.....SERVER ComputerName ANY 17000@ComputerNameif u don't know how to find out computer name thenfor computer name and other details visit my Computer Host ID post.....

I have tried to install NX6 with changed licenced file:SERVER ComputerName ANY 17000@ComputerNameAlso I have put system variables.When I want to run the LMTOOLS using licence file I see in the ugslicencing.log following error:14:33:16 (lmgrd) The license server manager has found no vendor daemons to start14:33:16 (lmgrd) (There are no VENDOR (or DAEMON) lines in the license file), lmgrd exiting.

hi anonymous u are trying to install UG NX6.first of all port value is 27000 not 17000......here the port value is changed from 27000 to 28000 in UG NX5 and NX6.u can check my this post for NX5 & NX6 -license-server-error-in-ug-nx5-and.htmland all of u please leave ur name.....and avoid anonymous ....so i can leave solution for that particular friend....have a nice day......

i have installed UG NX6 but when i start , geting these error.even i set environment variable but still have these problem. please help meNX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVERto be configured properly.it can either be set to the value port@hostname of theNX license server or it can be set to point directly to a license file.by default it will be of the form 28000@servername.regardspraveen

Hi Anonymous,check port value in your lic. file and environment variable the first 2 lines should be like this.SERVER host ID=20080618 28000@hostVENDOR ugslmdhere host means your computer name.have a nice day.

hi please help me. i am again facing problem. cant abt le to run UG NX6.in lic file i changed first two lines as below - SERVER this_host ID=20080618 28000@praveenroyVENDOR ugslmdpraveen roy is my computer name. after that i installed liscense server then installed NX 6.In environmental variable -have set VARIABLE NAME - UGII_LICENSE_FILEVARIABLE VALUE -28000@praveenroy.but still getting error message as below -"NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

Hi SKY,in lic file u have changed first two lines as below -SERVER this_host ID=20080618 28000@praveenroyVENDOR ugslmdpraveen roy is my computer name. lets change them with this.SERVER praveenroy ID=20080618 28000@praveenroyVENDOR ugslmdand enjoy.have a nice day.

hi i changed in lic file as your instruction but still getting error message -"NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"Please Help me. i want to run NX6 in my system.

i have installed UG NX6 with the following lines in license fileSERVER ekco ID=20080618 28000@ekcoVENDOR ugslmdekco is my computer namebut still getting the message:NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVERto be configured properly.it can either be set to the value port@hostname of theNX license server or it can be set to point directly to a license file.by default it will be of the form 28000@servername.I have checked the log file, it gives the message:-pid 1260 The TCP port number in the license, 28000, is already in use.Possible causes: 1) The license server manager (lmgrd) is already running for this license. 2) The OS has not "cleared" this port since lmgrd died. 3) Another process is using this port number (unlikely). Solutions: 1) Make sure lmgrd and all vendor daemons for this license are not running. 2) You may have to wait for the OS to clear this port. (lmgrd) Retrying for about 5 more minutes(lmgrd) Still trying... (lmgrd) Still trying... (lmgrd) Still trying... (lmgrd) Failed to open the TCP port number in the license.Please help!!!!

I trying to install nx5 .i have followed all the steps including setting environment variables but still it shows error set to wrong host or lic server not found. in licensing log file it states21:14:36 (lmgrd) pid 138021:14:36 (lmgrd) Failed to open the TCP port number in the license.i am installing UG in win xp.please help to solve this.ThanksNilay

hi, can u help me install nx5 please? so i edit lic. like this: SERVER Laptop ID=20070424 28000VENDOR ugslmdLaptop is my computer name. so i install ugs license. then i try to install nx5 but when it says write your hostname or something like that, i write:28000@Laptopand then i press next and it says server license could not be found. so what am i doing wrong?

hi chander, this is what i've done. first i installed UGS licesing and the license file that i used said this:SERVER Laptop ID=20070424 28000VENDOR ugslmdLaptop is my computer name. so i installed ugs license with no problem. then i try to install nx5, when it says write your hostname or something like that, i write:28000@Laptopand then i press next and a message appears saying that server license could not be found. is that normal?i've already done this -license-installation-error-solution.htmlthis is what happened after i restarted my laptop. i tried to open NX5 and it said something about nx license error: unknown error code.then i went to where all the bundles are and added one and tried again to open nx5 but still that same unknown error message appeared. can u please help me?

Hello,First of all thanks in advance for any help you are able to offer me. I've read through every page on your blog regarding installing NX5, and I cannot seem to get it working.The first three lines of my license file read:SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmdDAEMON uglmd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\uglmd.exe"where 'KrishanENGPC' is my computer name.I have the server running in lmtools, and I also have all of the settings under the 'Config Services' tab exactly as you have them on your blog page.I also have the environment variable running as; Variable name: UGS_LICENSE_SERVERVariable value: 28000@KrishanENGPCThe error message I receive now is:Initialization error-NX License Error: The desired vendor daemon is down [-97]please help, thanks!

Hi krishan,here u made error in third line of your lic. file.Because their is not any file in UG NX 6 in the provided path like"C:\Program Files\EDS\License Servers\UGNXFLEXlm\uglmd.exe"so correct your license file like this:SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmdDAEMON ugslmd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\ugslmd.exe"if problem not solved then change like this:SERVER KrishanENGPC ANY 28000@KrishanENGPCVENDOR ugslmdDAEMON lmgrd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\lmgrd.exe"hope that your problem will solve.

Hi Chander Pal!I'll hope you can help me.....I installed ansys 10.0 without problems, then I installed UGS5...without problems too.Somehow UGS interfered with the license of ansys and now the ansys license manager wont start up. When I try to wizard the licence file an error displays that it can't find the correct path.When I try to make changes inside lmtool, im not able to do it.I tryed to instal and unninstall both programs several times in order to reboot every registry and the same error keeps poping out. I also tryed cleaning the entire windows registry fromo both ugs and ansys entries, I manage to do it but when I re-install ansys the same error comes out.I installed both programs in several computers, only one has this problem....dont now what else I can do.Hope you can help me!!greetings. 2b1af7f3a8