Operation Manual Manitou Mlt 845
LINK ->->->-> https://byltly.com/2t7gSL
On the basis of experience, there are a number of possiblesituations in which operating the lift truck is contra-indicated.Such foreseeable abnormaluses, the main ones being listed below,are strictly forbidden. - The foreseeable abnormal behaviourresulting from ordinary neglect, but does not result from any wishto put the machinery to any improper use. - The reflex reactions ofa person in the event of a malfunction, incident, fault, etc.during operation of the lift truck. - Behaviour resulting fromapplication of the principle of least action when performing atask. - For certain machines, the foreseeable behaviour of suchpersons as: apprentices, teenagers, handicapped persons, traineestempted to drive alift truck, operator tempted to operate a truckto win a bet, in competition or for their own personalexperience.The person in charge of the equipment must take thesecriteria into account when assessing whether or not a person willmakea suitable driver.
A - THE TRUCKS SUITABILITY FOR THE JOB- MANITOU has ensured thatthis lift truck is suitable for use under the standard operatingconditions defined in this operators manual, with a STATIC testcoefficient OF 1.33 and a DYNAMIC test coefficient OF 1, asspecified in harmonized norm EN 1459for variable range trucks.
For operation under average climatic conditions, i.e.: between -15 C and + 35 C, correct levels of lubricants in all the circuitsare checked in production.For operation under more severe climaticconditions, before starting up, it is necessary to drain all thecircuits, then ensure correct levels of lubricantsusing lubricantsproperly suited to the relevant ambient temperatures. It is thesame for the cooling liquid.
- Our trucks comply with Directive 89/336/EC concerningelectromagnetic compatibility (EMC), and with the correspondingharmonized norm EN 12895. Their proper operation is no longerguaranteed if they are used within areas in which theelectromagnetic fields exceed the limit specified by that norm (10V/m).
- Only the operations and manuvres described in these operatorsmanual must be performed. The manufacturer cannot predict allpossible risky situations. Consequently, the safety instructionsgiven in the operators manual and on the lift truck itself are notexhaustive.
A - OPERATORS MANUAL- Read the operators manual carefully.- Theoperators manual must always be in good condition and in the placeprovided for it on the lift truck.- You must report any plates andstickers which are no longer legible or which are damaged.
B - DRIVERS OPERATING INSTRUCTIONS- Whatever his experience, theoperator is advised to familiarize himself with the position andoperation of all the controls and instruments before operating thelift truck.
C - ENVIRONMENT- Comply with site safety regulations.- If youhave to use the lift truck in a dark area or at night, make sure itis equipped with working lights.- During handling operations, makesure that no one is in the way of the lift truck and its load.- Donot allow anybody to come near the working area of the lift truckor pass beneath an elevated load.- When using the lift truck on atransverse slope, before lifting the jib, follow the instructionsgiven in the paragraph: INSTRUCTIONS FOR HANDLING A LOAD: D -TRANSVERSE ATTITUDE OF THE LIFT TRUCK.
- Never try to start the lift truck by pushing or towing it.Such operation may cause severe damage to the transmission. Ifnecessary, to tow the lift truck in an emergency, the transmissionmust be placed in the neutral position (see: 3 - MAINTENANCE: G -OCCASIONAL MAINTENANCE).
- Observe the companys traffic regulations or, by default, thepublic highway code.- Do not carry out operations which exceed thecapacities of your lift truck or attachments.- Always drive thelift truck with the forks or attachment to the transport position,i.e. at 300 mm from the ground, the jib retracted and the carriagesloping backwards.
- Use the rear-view mirrors frequently.- Drive round obstacles.-Never drive on the edge of a ditch or steep slope.- It is dangerousto use two lift trucks simultaneously to handle heavy or voluminousloads, since this operation requires particular precautions to betaken. It must only be used exceptionally and after riskanalysis.
INSTRUCTIONS- Make sure the revolving light is in place, switchit on and verify its operation.- Make sure the lights, indicatorsand windscreen wipers are working properly.- Switch off the workingheadlights if the lift truck is fitted with them.- Select thesteering mode HIGHWAY TRAFFIC (as model of lift truck) (see: 2 -DESCRIPTION: INSTRUMENTS AND CONTROLS).- Retract entirely the jiband put the attachment at 300 mm from the ground.- Place the slopecorrectors in the central position, i.e. the transverse shaft ofthe axles parallel to the chassis (as model of lift truck).- Liftup the stabilizers to the maximum and turn the blocks inwards (asmodel of lift truck).- For lift trucks with gearboxes:On the road,set off in 3rd gear and go into 4th (as model of lift truck) whenthe conditions and state of the road allow. In hilly areas, set offin 2nd gear and go into 3rd when the conditions and state of theroad allow.
- Lower the two stabilizers and lift the two front wheels of thelift truck (fig. G3). During this operation, transverse attitudemust be permanently maintained: the bubble in the level must bekept between the two lines.
- Keep the jib up and retract the telescopes completely (fig.G3).- Move the stabilizers very slowly and gradually as soon asthey are in contact with the ground and when they leave the ground.During this operation, the transverse attitude must be permanentlymaintained: the bubble in the level must be kept between the twolines.
B - SUITABILITY OF THE TRUCK FOR USE- MANITOU has ensured thatthis lift truck is suitable for use under the standard operatingconditions defined in this operators manual, with a STATIC testcoefficient of 1.25 and a DYNAMIC test coefficient of 1.1, asspecified in harmonised standard EN 280 for mobile elevating workplatforms.
- Stop the I.C. engine and remove the ignition key, when anintervention is necessary.- Read the operators manual carefully.-Carry out all repairs immediately, even if the repairs concernedare minor.- Repair all leaks immediately, even if the leakconcerned is minor.- Make sure that the disposal of processmaterials and of spare parts is carried out in total safety and ina ecological way.- Be careful of the risk of burning and splashing(exhaust, radiator, I.C. engine, etc.).
MAINTENANCE LOGBOOK- The maintenance operations carried out inaccordance with the recommendations given in part: 3 - MAINTENANCEand the other inspection, servicing or repair operations ormodifications performed on the lift truck or its attachments shallbe recorded in a maintenance logbook. The entry for each operationshall include details of the date of the works, the names of theindividuals or companies having performed them, the type ofoperation and its frequency, if applicable. The part numbers of anylift truck items replaced shall also be indicated.
- Any work on the load handling hydraulic circuit is forbiddenexcept for the operations described in part: 3 - MAINTENANCE.- Donot attempt to loosen unions, hoses or any hydraulic component withthe circuit under pressure.
BALANCING VALVE: It is dangerous to change the setting andremove the balancing valves or safety valves which may be fitted toyour lift truck cylinders.These operations must only be performedby approved personnel (consult your dealer).
The HYDRAULIC ACCUMULATORS that may be fitted on your lift truckare pressurized units. Removing these accumulators and theirpipework is adangerous operation and must only be performed byapproved personnel (consult your dealer).
- Disconnect the battery before any welding operations on thelift truck.- When carrying out electric welding work on the lifttruck, connect the negative cable from the equipment directly tothe part being welded, so as to avoid high tension current passingthrough the alternator.
The following recommendations are intended to prevent the lifttruck from being damaged when it is withdrawn from service for anextended period.For these operations, we recommend the use of aMANITOU protective product, reference 603726.Instructions for usingthe product are given on the packaging.
A1 - Blue zone (0 - 50) Use the lift truck with moderation, waitfor temperature to increase before normal operation.A2 - Green zone(50 - 100) Use lift truck normally.A3 - White/red zone (100 - 105)Use lift truck with moderation, monitor the temperature.A4 - Redzone (105 - 120) Stop the lift truck, look for the cause ofoverheating.
C - ORANGE I.C. ENGINE FAULT INDICATOR LIGHTIf the lamp comes onor flashes while the lift truck is in operation, a diagnostic faulthas been detected. The lift truck will operate in reduced mode.Consult your dealer without delay.
OPERATIONWhen the lift truck is switched on a control test isautomatically carried out.- Correct operation: All leds and thesound alarm function continuously for 2 seconds.- Faulty operation:All leds and the sound alarm function intermittently (stop the lifttruck and consult your dealer, never attempt a
Service Manual information was presented for correct use, step-by-step repair, maintenance procedures of Manitou MLT 845, MLT-X 845 modes. The electronic guide contains sections about general information, safety rules, specifications, the engine material, transmission, technical data, repair instruction, setting, recommendations with illustrations, many diagrams, and schemes, etc. Easy-to-read diagrams, schemes, and screenshots with a description will help you with the implementation of any procedures on your Manitou equipment.\n\nPlease read and make sure you understand each page in this tutorial and use it to full effect at every opportunity. Factory file comes in PDF format and includes 405 pages for reading. To view, the information has the program Adobe PDF Reader. Feel free to contact us if you have any problems with installation or maintenance.\n\nTable of Contents:\n\nGENERAL INSTRUCTIONS AND SAFETY NOTICE\nGroup 00 (General characteristics and safety)\nENGINE\nGroup 10 (Engine)\nOPTIONS - ACCESSORIES\nGroup 110 (Options - Attachments)\nTRANSMISSION\nGroup 20 (Transmission)\nAXLE ASSEMBLY - AXLE\nGroup 30 (Axle)\nBRAKE\nGroup 40 (Brake)\nTELESCOPIC BOOM\nGroup 50 (Boom)\nHYDRAULIC\nGroup 70 (Hydraulic)\nELECTRICITY\nGroup 80 (Electricity)","offers": {"@type": "Offer","price": "49","priceCurrency": "USD","priceValidUntil": "2023-02-17","availability": " ","category": "Heavy Technics + Repair","url": " -mlt-845-mlt-x-845-service-manual-pdf/"},"image": [" :2FVlczQGE32WQsSqCZ7ql/manitou-mlt-845-mlt-x-845-service-manual-pdf.png"," -mlt-845-mlt-x-845-service-manual-pdf.png"," -mlt-845-mlt-x-845-service-manual-pdf.png"," -mlt-845-mlt-x-845-service-manual-pdf.png"," -mlt-845-mlt-x-845-service-manual-pdf.png"]}Have something to Sell?You have a digital manual, catalog or software product?Become a EPCATALOGS Merchant and get everything you need to sell your downloads.Contact usHome/Heavy Technics + Repair/Manitou/Manitou MLT 845, MLT-X 845 Service Manual PDFManitou MLT 845, MLT-X 845 Service Manual PDF[2012]Type of catalogue:repair manualMake:ManitouRegion:WorldWideInclusive languages:EnglishAmount of disks:1 CD, 1 PDF, 405 pagesAvailibilityInstant DownloadOS:Windows XP 32 bit, Windows 7 32 bit, Windows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit, Windows 11 64 bitPrice, USD:49Buy nowManitou pdf manual instant previewService Manual information was presented for correct use, step-by-step repair, maintenance procedures of Manitou MLT 845, MLT-X 845 modes. The electronic guide contains sections about general information, safety rules, specifications, the engine material, transmission, technical data, repair instruction, setting, recommendations with illustrations, many diagrams, and schemes, etc. Easy-to-read diagrams, schemes, and screenshots with a description will help you with the implementation of any procedures on your Manitou equipment. 2b1af7f3a8